Перевод

English German Russian Ukrainian

Все Категории

Партнеры

Загрузка...
Загрузка...
Главная

Bonnet and Poppet repair kit for the FEBCO 765-1 PVB

« Вернуться к результатам поиска | Размещен в категории: Home & Garden » Home Improvement » Plumbing & Fixtures » Other Home Plumbing & Fixtures

Номер товара: 262869796176
Продавец: mtntrader (2406) 88.5% позитивных отзывов
Товар из: Loveland, Colorado, US

Посмотреть товар на eBay

Аукцион закончился.
 

Краткое описание товара

PLEASE NOTE: Due to the severe cold weather snap weather in the Houston are, we are experiencing a backlog of orders and are a couple of days behind on filling kit orders. We apologize for any inconvenience and hope to be caught up by the end of the weekWe now have a 10 kit Contractor Pack available. If you need several kits, check out our other auctions You are bidding on a Bonnet and Poppet repair kit for the Febco 765-1, 1" Pressure Vacuum breaker. The kit contains all of the parts that are designed to break due to unexpected freezing conditions with water still in the body of the PVB. Our kit is 100% Made in the USA The Kit consists of: Bonnet assembly "O" ring for Bonnet Poppet with washer Locknut to hold the canopy on Food grade grease packet (to lubricate the "O" ring) easy to follow instructions (not shown). How to identify if you have a FEBCO 1" Pressure Vacuum Breaker (PVB) IMPORTANT The opening at the top of your PVB should be 2 5/8 inches -outside diameter- (as shown in the picture above). If the opening is 1 5/8 inches, then you should order the 3/4 inch repair kit.The FEBCO 1" PVB will have "765-1" cast into the body. It is 4" wide, 4.5" tall and 3" thick. Also, look at the "bonnet". It has three plastic posts and three supports. If you measure the diameter of the poppet, it approximately 2 1/4" Shown to the right is a cutaway view of the 765-1 PVB showing the bonnet and poppet placement.

Детальное описание товара

eBay

PLEASE NOTE: Due to the severe cold weather snap weather in the Houston are, we are experiencing a backlog of orders and are a couple of days behind on filling kit orders. We apologize for any inconvenience and hope to be caught up by the end of the week

We now have a 10 kit Contractor Pack available. If you need several kits, check out our other auctions   

You are bidding on a Bonnet and Poppet repair kit for the Febco 765-1, 1" Pressure Vacuum breaker.

The kit contains all of the parts that are designed to break due to unexpected freezing conditions with water still in the body of the PVB.

Our kit is 100% Made in the USA

The Kit consists of:

  1. Bonnet assembly
  2. "O" ring for Bonnet
  3. Poppet with washer
  4. Locknut to hold the canopy on
  5. Food grade grease packet (to lubricate the "O" ring)
  6. easy to follow instructions (not shown).
How to identify if you have a FEBCO 1" Pressure Vacuum Breaker (PVB)

IMPORTANT

The opening at the top of your PVB should be 2 5/8 inches -outside diameter- (as shown in the picture above). If the opening is 1 5/8 inches, then you should order the 3/4 inch repair kit.

The FEBCO 1" PVB will have "765-1" cast into the body.

It is 4" wide, 4.5" tall and 3" thick.

Also, look at the "bonnet". It has three plastic posts and three supports.

If you measure the diameter of the poppet, it approximately 2 1/4"

 

FEBCO 1" PVB

Shown to the right is a cutaway view of the 765-1
PVB showing the bonnet and poppet placement.

 

 

« Вернуться к результатам поиска

Загрузка...